Sustainability

EPD Consultant Support for Indian Manufacturers

Last reviewed: 2026-10-13

Need an EPD for a customer, tender or export project? Tell us what you manufacture, where it is made and what the buyer has requested. ConformArc helps you organise the enquiry and discuss a relevant EPD consultant or specialist introduction.

Start with the requirement you have today. You do not need a completed LCA or a full data pack to send an enquiry. The selected provider confirms the work needed and prepares the scope and quotation.

Discuss My EPD Project

Product materials and documentation prepared for an Environmental Product Declaration project

At a glance

Is this for you?

Manufacturers preparing an Environmental Product Declaration for a customer, tender or export project. You can enquire before collecting every data point.

What to send with your enquiry

  • Product or product family
  • Manufacturing country and number of sites
  • Buyer request or programme requirement
  • Whether an LCA or EPD already exists
  • Target date

What a specialist can help with

  • Programme and product category rule review for the intended use
  • Product-family and manufacturing-site coverage discussion
  • LCA data collection, modelling and study preparation where needed
  • Declaration preparation and coordination of the relevant review process
  • Independent verification and publication arrangements under the selected programme
  • Responsibility mapping for future updates and supporting records
Scope and report acceptance. An EPD does not automatically establish that one product is environmentally superior to another. ConformArc does not issue or verify EPDs; preparation, independent verification and publication remain with the relevant providers and programme organisations.
Role clarity. Enquiry support and specialist introductions. Testing, technical advice, certification and regulatory decisions remain with the responsible service providers and authorities.

What an EPD is

An Environmental Product Declaration is a verified, published document that reports a product’s environmental impacts across its life cycle, using a life cycle assessment (LCA). It is a “Type III” environmental declaration under ISO 14025. Construction products are usually declared under EN 15804. Every EPD follows product category rules (PCR), is checked by an independent verifier and is published by an EPD programme operator. Construction-product EPDs are commonly valid for five years.

Who asks for EPDs

  • European and Middle East buyers of construction products, building materials and building services equipment
  • Architects and contractors working on green-building projects that reward EPDs (rating systems such as LEED, IGBC and GRIHA; check the current version of each)
  • Public and private tenders that score environmental data
  • EU customers preparing for the new Construction Products Regulation (EU) 2024/3110, which will progressively require environmental information, such as global warming potential, for construction products. Timing depends on product-specific acts.

The EPD process, step by step

  1. Confirm the programme operator and PCR your buyer accepts
  2. Define the product or product family and the manufacturing sites covered
  3. Collect one representative year of production data (energy, materials, transport, waste)
  4. Build the LCA model and calculate the results
  5. Write the EPD and background LCA report
  6. Independent third-party verification
  7. Registration and publication with the programme operator

The selected provider confirms the exact steps, programme rules and timeline for your product.

What an EPD costs

Cost depends on the number of products and sites, data quality and the programme’s verification and registration fees. One published Indian estimate puts a single EPD at roughly ₹10–15 lakh. This is indicative only. Ask each provider to separate consulting, LCA modelling, verification and programme charges, so quotes can be compared. ConformArc does not set provider fees.

Related: LCA vs EPD vs product carbon footprint

Turn a buyer request into a defined project

An EPD enquiry becomes easier to quote when the product range, manufacturing sites, intended market and programme requirements are clear. If your customer has supplied a specification or named an EPD programme, mention it in your enquiry. If they have only asked for an EPD, say that too.

The initial discussion should establish what is already available, which inputs are missing and which specialist workstreams need to be included. This helps you compare proposals on the same scope.

What affects the quotation

Product variants, site coverage, available production data and the required study boundaries affect the work. Ask for consulting, modelling, verification and programme charges to be identified clearly. A useful proposal should state the deliverables, information you must provide, exclusions and dependencies.

If you also need a life cycle assessment or product carbon footprint, tell us so the sequence can be scoped together while keeping deliverables distinct. Return to Sustainability.

Send these details to start

Share the product or product family, manufacturing country, number of sites, buyer request and target date. Tell us whether you already have an LCA or EPD. A short description is enough for the initial enquiry; do not upload confidential manufacturing records at this stage.

See What Information to Send · Discuss My EPD Project

Frequently asked questions

Can I enquire before collecting all the data?

Yes. Describe your product and the buyer’s requirement. Data collection and evidence gaps can be discussed when the specialist scopes the work.

Can one project cover several products or factories?

Potentially. The provider must assess product grouping, site coverage and the applicable programme rules before quoting.

Does ConformArc issue or verify EPDs?

No. ConformArc reviews enquiries and discusses specialist introductions. Preparation, independent verification and publication remain with the relevant providers and programme organisations.

Sources / further reading

Requirements can change. Confirm the current route and applicable edition for the specific product before starting the project.

Discuss your EPD requirement

What product needs an EPD, and who has requested it? Send the details you have so we can discuss the next step and a relevant specialist introduction.

We use your details to respond to this enquiry. If a suitable external specialist could help, we will tell you who we propose to contact and ask before sharing your name, contact details or project information. The specialist may then contact you about this request. Read the Privacy Notice. See also how we choose providers.

Related options for Environmental product declaration (EPD).

Add more details (optional)

We use your details to respond to this enquiry. If a suitable external specialist could help, we will tell you who we propose to contact and ask before sharing your name, contact details or project information. Please do not include passwords, confidential documents or sensitive personal information.