Which EU laws apply to electrical and electronic products?
Most electrical products fall under more than one law. Each one must be listed on your EU Declaration of Conformity.
| EU law |
What it covers |
Typical products |
Route |
| Low Voltage Directive (LVD) 2014/35/EU |
Electrical safety of equipment rated 50–1000 V AC or 75–1500 V DC |
Appliances, lighting, power supplies, chargers, motors, instruments, control equipment |
Self-declaration (Module A), based on testing |
| EMC Directive 2014/30/EU |
Electromagnetic emissions and immunity |
Almost any product with electronics |
Self-declaration, or optional notified body EU-type examination |
| RoHS Directive 2011/65/EU (as amended by Directive (EU) 2015/863) |
Restriction of 10 hazardous substances, such as lead, mercury and cadmium |
Electrical and electronic equipment in scope |
Self-declaration, based on supplier evidence and/or testing |
| Radio Equipment Directive (RED) 2014/53/EU |
Radio spectrum use, plus safety, EMC and, for certain connected products, cybersecurity |
Anything with Wi-Fi, Bluetooth, cellular, RFID, LoRa or other radio |
Self-declaration if harmonised standards are applied in full; otherwise a notified body |
| Machinery Directive 2006/42/EC → Machinery Regulation (EU) 2023/1230 |
Safety of machines |
Equipment with moving parts driven by a power source |
See Machinery Safety & CE |
Important: if your product contains a radio, the safety and EMC requirements are assessed under RED rather than LVD and EMC separately. Your specialist will confirm this.
Other EU rules often apply alongside CE marking. These include the General Product Safety Regulation (EU) 2023/988 for consumer products, ecodesign and energy-labelling rules, WEEE take-back and marking, and the Batteries Regulation (EU) 2023/1542 for products with batteries. Ask your specialist to check them at the same time.
What testing is needed?
Testing is done against harmonised European standards that match your product. Common examples are below. The exact standards and editions must be confirmed for your product.
| Test area |
Example standards |
What is checked |
| Electrical safety |
EN 62368-1 (audio/video and IT equipment), EN 60335 series (household appliances), EN 61010-1 (measurement and laboratory equipment), EN 60598 series (luminaires), EN 60204-1 (electrical equipment of machines) |
Shock, fire, heating, insulation, markings, instructions |
| EMC emissions |
EN 55032 (multimedia), EN 55014-1 (appliances and tools), EN 55015 (lighting), EN 61000-6-3/-6-4 (generic), EN 61000-3-2/-3-3 (harmonics and flicker) |
Interference your product creates |
| EMC immunity |
EN 55035, EN 55014-2, EN 61547, EN 61000-6-1/-6-2 |
Whether the product keeps working when exposed to interference |
| Radio |
EN 300 328 (2.4 GHz), EN 301 893 (5 GHz), EN 301 489 series (radio EMC), EN 62311 / EN 62479 (human RF exposure) |
Spectrum use, radio EMC, RF exposure |
| Cybersecurity (RED) |
EN 18031-1/-2/-3 |
Network protection, personal data and fraud protection for connected radio products in scope |
| RoHS |
EN IEC 63000 (technical documentation); laboratory analysis where supplier evidence is weak |
Restricted substances in materials and components |
Do you need an accredited laboratory? For self-declared routes, EU law does not always require an accredited laboratory. In practice, European buyers and importers usually expect reports from an ISO/IEC 17025 accredited laboratory, and some will only accept reports from specific labs. Ask your buyer before you book. If you already hold IECEE CB Scheme test reports, a laboratory may be able to use them as a basis and test only the European national differences.
Self-declaration is not “no testing”
Most electrical products are CE marked through self-declaration. That does not mean testing is optional. Self-declaration means that no notified body issues a certificate. The manufacturer must still hold test reports and a technical file, and sign the declaration on its own legal responsibility. If a market surveillance authority or your buyer asks for evidence and you do not have it, the CE mark is not valid.
A “CE certificate” offered by an organisation that is not a notified body for your product is a private document. It does not replace your test reports, technical file or EU Declaration of Conformity. See EU Declaration of Conformity: what it must include.
When is a notified body needed for electrical products?
- LVD: never. There are no notified bodies under the LVD.
- EMC: optional. Some manufacturers choose an EU-type examination by a notified body when harmonised standards cannot be fully applied.
- RED: needed when the relevant harmonised standards are not applied in full. Since 1 August 2025, connected radio products in scope of Delegated Regulation (EU) 2022/30 must meet cybersecurity requirements. The EN 18031 standards were cited in the Official Journal with restrictions. If a restriction affects your product (for example, around passwords or parental controls), a notified body is needed.
- Machinery: only for certain high-risk categories listed in the machinery law.
What goes into the technical file
- General description, models and variants covered
- Design and manufacturing drawings, circuit diagrams, PCB layouts and bill of materials
- Risk assessment
- List of EU laws and harmonised standards applied
- Test reports (safety, EMC, radio, RoHS evidence)
- Critical component list with certificates or approvals
- User instructions and safety information in the language(s) of the country of sale
- Product labels and marking
- Production control description, so every unit matches the tested sample
- Signed EU Declaration of Conformity
Keep the file for 10 years after the last unit is placed on the EU market. If the product is built into or sold with a machine, see the machinery CE documents checklist for how the wider file is organised.
How the process works
- Share the product. Model, photos, power rating, whether it has a radio or a battery, and the target countries.
- Route confirmation. The specialist lists every applicable law and standard and confirms whether a notified body is needed.
- Pre-compliance review. Optional design and component checks to reduce the risk of failing formal tests.
- Formal testing. Safety, EMC, radio and RoHS testing on a representative sample at a suitable laboratory.
- Fix and retest if a test fails.
- Technical file and declaration. File compiled, EU Declaration of Conformity drafted for your signature.
- Notified body, only if the route requires it.
- CE marking and labels, plus an EU-based responsible person where required.
What affects cost and timeline
- Number of laws and standards that apply
- Number of models and variants, and whether one test sample can represent a family
- Whether the product has a radio, a battery or software that connects to a network
- Whether you already hold CB reports, component certificates or earlier test reports
- Failures and retests, which are the most common cause of delay
- Notified body involvement, where required
- Technical file preparation, translations and an EU-based responsible person
For typical price ranges, see CE certification cost in India. The selected provider confirms its own quotation and timeline with you.
Coming changes to plan for
- Cyber Resilience Act (EU) 2024/2847: products with digital elements must meet new cybersecurity requirements. Reporting obligations for actively exploited vulnerabilities apply from 11 September 2026, and the main requirements apply from 11 December 2027.
- Machinery Regulation (EU) 2023/1230: replaces the Machinery Directive from 20 January 2027. This matters for electrical equipment that is part of a machine.
Products we commonly receive enquiries for
LED lighting and drivers · Power supplies, chargers and adaptors · Solar inverters and charge controllers · Household and kitchen appliances · Industrial controllers, PLC panels and drives · Measuring and laboratory instruments · IoT and smart-home devices · Electric motors and pumps · EV chargers · Medical-adjacent electronics (non-medical use)
These are examples of enquiries. They are not a list of completed projects.
Share the product, the target countries and what your buyer has asked for. We clarify the enquiry, agree any specialist introduction with you before sharing identifiable details, and the provider confirms the route, tests, documents, fees and timeline directly with you.
For the wider picture across all product types, see CE certification in India. You may also want Industrial EMC Testing, RoHS Testing & Compliance, Industrial Control Panel Testing, Machinery Safety & CE and UL / North American product safety.
Discuss my product.