What CE marking actually means
CE marking shows that the manufacturer has assessed its product against all EU product legislation that applies to it and declares that the product meets the essential requirements. The manufacturer signs an EU Declaration of Conformity, keeps a technical file, and then affixes the CE mark.
People in India often say “CE certification”, and many buyers ask for a “CE certificate”. In practice there are two very different situations:
Self-declaration routes. For many products (for example much low-voltage electrical equipment and many machines), the manufacturer can complete the conformity assessment itself, using appropriate testing and documentation, without a notified body. There is no official “CE certificate” in this route. The key documents are your test reports, technical file and EU Declaration of Conformity.
Notified body routes. For higher-risk products (for example many medical devices, higher-category pressure equipment, ATEX equipment and certain machinery), an EU-designated notified body must assess the product or quality system and issue a certificate. Only bodies listed in the European Commission’s NANDO database can do this, and only within their notified scope.
A certificate from an organisation that is not a notified body for that legislation does not replace either of these. If a supplier offers a low-cost “CE certificate” without explaining the route, ask which legislation, which module and which notified body number applies. See also CE marking vs CE certification.
CE certification requirements for Indian exporters
Whatever your product, a European buyer or market surveillance authority will expect the same core set of evidence. The details change by product, but the list does not.
| Requirement |
What it means in practice |
Who prepares it |
| Applicable EU laws identified |
Every directive or regulation that covers the product (for example LVD, EMC, RoHS, RED, Machinery, PED, ATEX) |
Manufacturer, usually with a specialist |
| Harmonised standards selected |
The European standards used to show the product meets each law |
Specialist and test laboratory |
| Risk assessment |
Hazards identified and linked to design measures and user instructions |
Manufacturer, with specialist support |
| Test reports |
Evidence that a representative sample meets the selected standards |
Test laboratory |
| Technical file |
Description, drawings, circuit diagrams, risk assessment, standards list, test reports, manuals, labels |
Manufacturer, with specialist support |
| Notified body certificate |
Only where the law requires third-party assessment for that product or category |
EU notified body listed in NANDO |
| EU Declaration of Conformity |
One signed declaration listing every applicable law and standard |
Manufacturer (or its EU authorised representative) |
| CE marking and labels |
CE mark, product identification, manufacturer name and postal address, and the notified body number where one is involved |
Manufacturer |
| EU-based responsible person |
For many products, an economic operator established in the EU (Regulation (EU) 2019/1020, Article 4) |
Importer, authorised representative or fulfilment service provider |
Read more: How to write an EU Declaration of Conformity.
Self-declaration still needs testing
A common misunderstanding is that “self-declaration” means no testing. That is wrong for most products.
Under the self-declaration route (Module A, internal production control), no notified body is involved. But the manufacturer must still prove that the product meets the essential requirements. For electrical and electronic products this almost always means electrical safety and EMC test reports, plus RoHS evidence and, for wireless products, radio test reports. European importers and buyers usually ask to see those reports before they place an order.
So the real difference between the two routes is this:
- Self-declaration: you test, compile the file and sign the declaration yourself. No certificate is issued by anyone.
- Notified body route: you do all of the above, and an EU-designated notified body examines the design, the production quality system or both, then issues a certificate whose number appears next to the CE mark.
See the full guide for electrical products: CE for electrical and electronic products.
Which products need a notified body?
| Product group |
EU law |
Is a notified body needed? |
| Most electrical equipment 50–1000 V AC / 75–1500 V DC |
LVD 2014/35/EU |
No. Self-declaration only, based on testing |
| Electrical and electronic equipment (EMC) |
EMC 2014/30/EU |
Usually no. A notified body EU-type examination is optional |
| Radio and wireless products |
RED 2014/53/EU |
No, if harmonised standards are applied in full. Yes, if they are not, including where the restricted EN 18031 cybersecurity standards cannot be fully applied |
| Most machinery |
Machinery Directive 2006/42/EC → Regulation (EU) 2023/1230 from 20 Jan 2027 |
No for most machines. Yes for certain high-risk categories listed in the law, depending on the route |
| Pressure equipment |
PED 2014/68/EU |
Category I: no. Categories II, III and IV: yes |
| Equipment for explosive atmospheres |
ATEX 2014/34/EU |
Category 1, and category 2 electrical equipment: yes. Category 2 non-electrical: technical file lodged with a notified body. Category 3: no. See ATEX vs IECEx |
| Medical devices |
MDR (EU) 2017/745 |
Class I (non-sterile, non-measuring, non-reusable surgical): no. Class Is/Im/Ir, IIa, IIb and III: yes |
This is a summary. The specialist must confirm the route for your exact product, model range and intended use.
Who needs CE marking support
CE marking support is most useful when:
- You are exporting your first product range to the EU or EEA and your buyer has asked for CE marking.
- A customer has rejected a “CE certificate” you already hold and asked for test reports, a Declaration of Conformity or a notified body certificate.
- You have redesigned a product, changed critical components or added wireless or software features.
- You supply machinery, panels or skids that will be integrated into a larger installation in Europe.
- You manufacture pressure equipment, hazardous-area equipment or medical devices where a notified body may be required.
- You are preparing for the EU Machinery Regulation (EU) 2023/1230, which generally applies from 20 January 2027.
Products we commonly receive CE enquiries for
This list shows common examples only. Many products fall under more than one law. A specialist must confirm the legislation for your exact product and intended use.
How the CE marking process works
- Identify every applicable EU law from the product’s function, power supply, intended users and environment.
- Identify harmonised standards that give a presumption of conformity where they fit.
- Choose or confirm the conformity assessment route (self-declaration Module A, or notified-body modules where required).
- Carry out the risk assessment linking hazards to design measures and user information.
- Test the product against the selected standards on a representative sample.
- Prepare the technical file (description, drawings, risk assessment, standards list, test reports, instructions, labels, production controls).
- Involve a notified body where required.
- Sign the EU Declaration of Conformity and affix the CE mark.
- Arrange an EU-based responsible person where Regulation (EU) 2019/1020 Article 4 or other laws require it.
- Maintain compliance when the product or laws change.
A machinery compliance documents checklist can help you prepare inputs before the review.
CE certification cost: what affects the quote
Published “CE certification” prices in India vary widely because they describe different services. Compare quotes on what is included. Main cost factors:
- Number of EU laws and standards that apply
- Whether testing is required, how many tests, and how many product variants
- Whether a notified body is required, and for which module
- Whether the provider prepares the technical file or only reviews yours
- Site visits, sample shipping and redesign support
- Translation of instructions and labels
- Ongoing services such as an EU-based responsible person
ConformArc does not set provider fees. The selected provider confirms scope, fees and timeline directly with you. For typical published price ranges in India and how to compare quotes, read CE certification cost in India.
CE marking compared with other export requirements
| Requirement |
What it covers |
Where it applies |
| CE marking |
EU product legislation |
EU/EEA |
| UKCA marking |
UK product legislation |
Great Britain (check current UK rules) |
| UL / NRTL |
North American product safety |
USA and Canada — see UL support |
| BIS |
Indian Quality Control Orders |
India — see BIS FMCS for foreign manufacturers |
Upcoming EU changes that affect CE projects
- Machinery Regulation (EU) 2023/1230 generally applies from 20 January 2027.
- Cyber Resilience Act (EU) 2024/2847 sets cybersecurity requirements for products with digital elements, with essential requirements applying from 11 December 2027.
- Radio equipment with internet connectivity has had cybersecurity requirements under the RED delegated act since 1 August 2025.
Share the product, target market, current stage and buyer wording. We clarify the enquiry, agree any specialist introduction with you before sharing identifiable details, and the provider confirms the CE route, tests, documents, fees and timeline directly with you.
See how CE marking works · Discuss Your CE Requirement
Related guides: CE Certification Cost in India · EU Declaration of Conformity